fbpx

CAMTEC Classes

Construction Management

3-Hour Residential Builders Continued Competency

Instructor: 
Edward Wenz – Michigan Builders Training & Builders Con-Ed, LLC
   
All State of Michigan licensed builders requiring renewal by May 31 should take this mandatory refresher.  The class topics include: Law – Occupation Code / OSHA Safety / Building Codes Updates. Builders are required to own the current code book that is adopted in the state. To purchase a book, visit www.iccsafe.org/store.

PLEASE CHECK BACK FOR THE NEXT CLASS DATE

Advanced Printreading

This 8-week course is intended for participants who have an intermediate knowledge of basic printreading and estimating procedures. The course builds upon the information presented in the “Printreading for Residential and Light Commercial Construction” program and provides a more comprehensive look at the terms and materials used in heavy commercial construction. The course uses a combination of lecture and in-class labs to assist participants with the development of core competencies needed by project managers, project engineers, and field superintendents who have responsibility for interpreting prints on commercial construction sites. Recommended pre-requisite programs include:

  • Printreading for Residential and Light Commercial Construction
  • Estimating

Instructor:
Chris Dow- Consultant

PLEASE CHECK BACK FOR OUR NEXT CLASS DATE AND INFO

Cost Estimating of a Construction Change Order

This course contains the building blocks every cost engineer, project engineer, superintendent, or project manager needs to know including hands‑on estimating of a bulletin/change order, overview of contract and changes, formal requirements for change, constructive changes, responsibilities of the owner/contractor, time impact analysis of a change, pricing the change, and hands-on example of a change estimate.  Considerable emphasis is placed on defining elements of the cost estimate and the allocation of such elements in a project.  Examples and exercises make this seminar meaningful and enjoyable for all participants. Course book is provided.

Instructor:
Tony Woodrich, Administrative Controls Management, Inc.

CLICK HERE FOR COURSE DATES AND TO REGISTER

Estimating

(Prerequisite- Printreading experience)

This course provides an overall knowledge of construction cost estimating from the standpoint of a General Contractor or Construction Manager. It will focus on procedures for basic quantity take-offs and pricing for most construction divisions from Earthwork to Electrical. An overview and demonstration of estimating tools and software will be conducted throughout the class. Review of types of estimates required throughout the construction process.

(3 sessions)

Instructor:
Michael Woodhouse, United Consulting Services

CLICK HERE FOR COURSE DATES AND TO REGISTER

Planning & Scheduling

This course introduces the concepts of Critical Path Method (CPM) for scheduling. This process is typically performed with Primavera or Microsoft Project software; however, students will develop a CPM network by hand to understand what the scheduling tools and computer applications are doing. Sample computer reports will be shown and discussed. A schedule has value if it is used. Progress collection and control will be explained so the schedule can become a “living” document reflecting actual progress, a history of what has been accomplished, and a road map to project completion. Implementing a Project Management Office (PMO) will be discussed, organization, Work Breakdown Structures (WBSs), and Resource Assignment Matrix (RAM) tools will be addressed to illustrate additional ways to help manage work scope and project teams.

(1 session)

Instructor:
Tony Woodrich, Administrative Controls Management, Inc.

CLICK HERE FOR COURSE DATES AND TO REGISTER

Printreading for Residential & Light Commercial Construction

Formerly titled Blueprint Reading. Students will learn a series of related steps leading to an understanding of shop blueprints, with emphasis placed on the interpretation of blueprints, performing mathematical computations, basic blueprint terminology and sketching various views of pictorial and orthographic drawings. Plot plans, floor plans, elevations, sections, and details of all elements that make up a blueprint will be presented. This course provides experience in exploring residential and light commercial documents, as well as large construction project documents. Class discussion and review are followed by assignments on the specific project with follow-up clarifications.

(15 sessions)

Instructors:
Chuck Bovair – Consultant
Chris Dow- Consultant

THE NEXT COURSE BEGINS SEPTEMBER 10!

CLICK HERE TO REGISTER

Project Cost Management

This course offers best practices for cost management. An explanation is provided as to why cost management on a construction project is different than accounting. Cost reporting is defined, examined, and explained. Methods are explained to forecast cost at job completion, such as earned value. Change control depending on the contract type is examined.  Trends and forecasting are also explained.
(1 session)

Instructor:
Tony Woodrich, Administrative Controls Management, Inc.

CLICK HERE FOR COURSE DATES AND TO REGISTER

Project Documentation & Closeout

The dynamics of the workplace demand that activity records be maintained on a regular basis. Regardless of whether the work place is a manufacturing environment or construction job site, documentation of daily activity is essential for managing operations and minimizing disputes. This workshop is designed to equip participants with an understanding of the needs for documentation, the appropriate content of project records, and the various forms of project documentation. (1 session)

Instructor:
Tony Woodrich, Administrative Controls Management, Inc.

CLICK HERE FOR COURSE DATES AND TO REGISTER

Project Management & Supervision

This course provides a thorough presentation of the principles used in Project Management. Participants receive instruction in effective management of projects to enable them to remain competitive and successful in today’s construction environment. The project environment is discussed, as well as tools to plan organizational response to work. Project management implementation is explained including the effective management of resources. It is not enough to effectively manage others, tools and tips are provided for managing one’s daily schedule, and responding to emergencies on the job. Progress collection, control, and performance measurement is explained. Projects rarely go according to plan – strategy and tactics are explained to manage project change, and effective project closeout is discussed.

Instructor:
Tony Woodrich, Administrative Controls Management, Inc.

CLICK HERE FOR COURSE DATES AND TO REGISTER

ONLINE Project Management Professional Exam Prep Course

The Project Management Professional (PMP)® credential is the most important industry-recognized certification for project managers. Globally recognized and demanded, the PMP® demonstrates that you have the experience, education and competency to lead and direct projects.

This completely online and self-paced project management program builds successful project managers at all levels of the organization. It provides a comprehensive preparation for the PMP® certification exam including exam-taking tips, 12 comprehensive module quizzes, five process group tests, and two full-length, 200-question practice exams covering the PMBOK® Guide areas of knowledge, which will provide a report to help you determine your areas of weakness.

CAM members are eligible for a $20 Visa or American Express gift card. To receive your $20 gift card, use discount code CAMTEC.

CLICK HERE FOR MORE INFORMATION

Construction Law &
Contracts Professional

Accounts Receivable Management & Collections

This course is designed to prepare your accounts receivable administrator with the tools necessary to manage the collections process timely and efficiently.  We’ll look at everything from the first call to the day you cash the check. We  will also review the court processes, including the collection suit and foreclosure. Why sell if you can’t collect?

(1 session)

Instructors:
Mark Merlanti – Finkel, Whitefield, and Selik

CLICK HERE FOR COURSE DATES AND TO REGISTER

AIA Contracts

AIA’s General Conditions of the Contract for Construction have been revised! Learn all about the changes at this upcoming workshop. 


It is absolutely vital for a contractor to choose an unbiased contract that apportions risks and responsibilities in a fair and balanced manner. The A201™–2007, General Conditions of the Contract for Construction is the keystone document in a majority of projects that set forth a contractor’s roles and responsibilities on a construction project. The A201 is incorporated by reference into other contract documents with owners, architects and subcontractors and puts a contractor on solid legal footing with the owner of a project by balancing risks and responsibilities equitably. This seminar will instruct those who negotiate and manage the use of AIA contracts, including design-build, construction management, and subcontract agreements.

(1 session)

Instructor:
R. Edward Boucher – Kotz, Sangster, Wysocki & Berg, P.C

CLICK HERE FOR COURSE DATES AND TO REGISTER

Construction Liens – A Remedy for Payment on Private Projects Against the Owner's Land

This is a fast-paced nuts and bolts workshop on how to establish a construction lien for contractors, subcontractors, and suppliers on commercial, industrial, office, and residential projects. Learn how to prevent liens if you are an owner or a general contractor. Learn the critical time periods and how to fill out the notice of furnishing, claim of lien, sworn statement, lien waiver, and other necessary forms. In these challenging times, when getting paid is so important, this workshop is a must for owners, contractors, subcontractors, and suppliers.

(1 session)

Instructor:
Marty Burnstein – Law Offices of Marty Burnstein

CLICK HERE FOR COURSE DATES AND TO REGISTER

Contract Payment Provisions, Dispute Resolutions Clauses & Michigian Builders Trust Fund Act

Instructor: Bruce Pregler, Facca, Richter & Pregler, PC

This class identifies various payment and dispute resolution provisions contained in the construction industry’s form contracts and private contracts. Special attention is given to how various payment clauses can impact timely payment for base contract work and extras. We will examine alternative dispute resolution provisions for mediation, arbitration, and litigation and identify which clauses are to be avoided and which alternative dispute clauses are fair and effective. Finally, we will examine the Michigan Builders Trust Fund Act – MCLA 570.151. You will learn how this Act is violated and how to avoid liability.

September 20, 2018 – 8:00 a.m.-10:00 a.m.

CLICK HERE FOR CLASS DATE AND TO REGISTER

Mitigating Contract Risk

Construction contracts often contain risk-shifting clause that must either be negotiated out of the agreement or, if they cannot be negotiated, should be noted as an important requirement and followed by the project team.  This class identifies the most common risk-shifting clause and presents strategies for negotiating over, mitigating, and managing them.

(1 session)

Instructor:
R. Edward Boucher – Kotz, Sangster, Wysocki & Berg, P.C

CLICK HERE FOR COURSE DATES AND TO REGISTER

Payment Bonds - A Remedy for Payment on Public Work Projects

In public work projects, there are no construction liens.  Payment bonds are furnished by the contractor to the owner to protect payment to the subcontractor and supplier.  In this nuts and bolts workshop you will learn what the necessary steps are to establish a claim against the payment bond.  You will also learn the critical time periods, how a bond claim is enforced, and how a claim can still be valid if a time period is missed.  Because so much of the current work in Southeast Michigan is public and governmental, this workshop is critical.

(1 session)

Instructor:
Marty Burnstein – Law Offices of Marty Burnstein

CLICK HERE FOR COURSE DATES AND TO REGISTER

CAMTEC Safety & Health

EPA RRP Certified Lead Renovator Initial Training

This course is the EPA Renovation, Repair, and Painting (RRP), a one-day course that provides basic lead-based paint information to contractors who perform renovations, repairs, and painting activities in houses built before 1978 or child-occupied facilities, as required by EPA and the State of Michigan. Course topics include: lead characteristics, uses, health effects on adults and children, lead-safe work practices to minimize lead containing dust during work activities, negative lead assessments, clean-up procedures, post-cleaning verification, personal protection equipment, training of non-certified workers, and documentation. Includes a course exam. Successful completion of this course and award of the training certificate qualifies the trainee as a Certified Renovator. EPA required, by April 22, 2010, for all contractors who work in pre-1978 housing and child occupied facilities, including renovation contractors, maintenance workers in multi-family housing, painters, building supervisors and landlords, homeowners who are planning to remodel, and other specialty trades (plumbers, heating and cooling, and electricians).

Instructor:  Ed Wenz, Contractors Training Institute

PLEASE CHECK BACK FOR NEXT AVAILABLE CLASS 

EPA RRP Certified Lead Renovator Refresher Training

This refresher course is the EPA Renovation, Repair, and Painting (RRP), a half-day course that provides basic lead-based paint information to contractors who perform renovations, repairs, and painting activities in houses built before 1978 or child-occupied facilities, as required by EPA and the State of Michigan. Course topics include: lead characteristics, uses, health effects on adults and children, lead-safe work practices to minimize lead containing dust during work activities, negative lead assessments, clean up procedures, post-cleaning verification, personal protection equipment, training of non-certified workers, and documentation. Includes course exam. Successful completion of this course and award of the training certificate qualifies the trainee as a Certified Renovator. For more information regarding the Renovation, Repair, & Painting (RRP) Rule, visit the EPA website www.epa.gov/lead/index.html.

Students must bring proof of full certification (from the last 5 years) to the class.

(1 session)

Instructor:  Edward Wenz, Contractors Training Institute

PLEASE CHECK BACK FOR THE NEXT UPCOMING CLASS

OSHA 10-HOUR

This program is designed to provide participants with a basic understanding of the hazards present in most construction projects. Participants will be able to identify, and then avoid, reduce, or eliminate job hazards. In addition, they will become more familiar with required record-keeping and MIOSHA enforcement procedures. Special emphasis will be placed on those areas that are the most hazardous. Upon completion of the course, the student will receive an OSHA Construction Safety and Health 10-Hour course completion card.

(2 sessions)

Instructor:
Jason Griffin – Construction Association of Michigan

CLICK HERE FOR COURSE DATES AND TO REGISTER

OSHA 30-HOUR

This course is recommended for employees with a responsibility for site safety.  It will cover OSHA policies, procedures and standards, as well as construction safety and health principles.  Topics include the scope and application of the OSHA construction standards including inspections, citations and appeals, as well as employee & employer rights under the Act.  Additional topics include Pre-Task Planning, Focus-Four Hazards, Personal Protective Equipment (PPE), and construction specific health issues, among others.  Upon completion of the course, the student will receive an OSHA construction safety and health 30-Hour course completion card.  (Class meets 4 times)

(4 sessions)

Instructor:
Jason Griffin – Construction Association of Michigan

CLICK HERE FOR COURSE DATES AND TO REGISTER

OSHA 30-Hour for General Industry

Based on the Occupational Safety and Health Administration’s (OSHA) 1910 General Industry Regulations, this course is intended to inform workers about the purpose of OSHA and their rights to have a safe workplace. The course also raises a workers level of awareness about basic safety and health hazards that may be present in the workplace. The course is comprised of a series of modules that must add up to 30 hours of training time and does not include lunch or breaks. All participants who successfully complete this program receive their OSHA 30-Hour General Industry card their training record. The program is spread over 4 days with 7.5 hours of training completed each day.

CLICK HERE FOR COURSE DATES AND TO REGISTER

Part 690: Silica in Construction

THE NEW SILICA STANDARD IS NOW ENFORCEABLE – PROTECT YOUR COMPANY FROM COSTLY FINES AND CITATIONS

Get right to the facts of the new standard and reduce the potential for long-term catastrophic compensation claims. Learn what respirable crystalline silica is, its hazards, methods of compliance with Table 1 of the new standard, and the recordkeeping requirements required by the standard. Also discuss practical solutions your company should consider as you work to comply with this regulation.

CLICK HERE FOR MORE INFO AND TO REGISTER FOR THE NEXT CLASS

Respiratory Protection

Instructor: Jason Griffin, CAM Director of Education & Safety Services

This program will assist participants with the understanding of what is needed to comply with the MIOSHA Part 451: Respiratory Protection standard by providing an overview of the elements of the respiratory protection program, assigned protective factors (APF), training requirements, medical evaluations and voluntary use of respiratory protection on the jobsite. Also, discuss practical solutions your company should consider as you work to comply with this regulation.

THIS CLASS IS AVAILABLE FOR GROUPS OF 10 OR MORE, IN OUR CLASSROOM OR YOUR LOCATION – CALL (248) 972-1133 FOR SCHEDULING INFORMATION 

First Aid, CPR & AED Combined

Every job site is required to have someone certified in first aid. Are you in compliance?This course teaches the principles of basic life support for adults. The course details “hands-only” CPR, first aid, choking in adults, signs, and symptoms of heart attack and stroke, and treatment for shock. It explains how AEDs work, and why they’re a critical part of emergency cardiac care.Certification is valid for a period of two years.

Click here for next date and to register

Qualified Rigger Class (Advanced Rigging Fundamentals)

This fast paced course covers basic rigging gear, rigging concepts and introduces the students to some intermediate rigging skills and applications. Essential knowledge of slings and rigging hardware is covered. Equipment capacities, sling hitch types, working load limits and the reduction of rated capacities for certain situations is also covered. The students will learn to estimate weights and how to calculate tensions based on sling angles with symmetric and non-symmetrical loads. ASME B30 Pre-use inspection requirements are covered for slings and typical rigging hardware used in rigging applications. Selection of the proper slings and equipment is addressed in the basic lift planning workshops. Load control basics and proper load handling procedures are reviewed to provide the students with safe and efficient methods required to rig and hoist a load.

CLICK HERE FOR DATES AND TO REGISTER

ONLINE Safety Training

The Construction Association of Michigan has partnered with ClickSafety, the most well known provider of web based safety and health training, to offer CAM members a 10% discount off of the price of training.  Use promo code CAM10 to get a discount off of any ClickSafety topics, including:

  • OSHA 10 for Construction
  • OSHA 30 for Construction
  • Fall Protection
  • Accident Investigation
  • Asbestos Awareness
  • Confined Space
  • Hazwoper Refresher

CLICK HERE TO VISIT CLICKSAFETY WEBSITE

MIOSHA Training
Institute Classes

Asbestos & Lead Awareness - MTI Elective

Construction trades routinely renovate and demolish buildings that were built prior to 1981. These construction activities often result in contact with asbestos-containing materials. General industry employers are also subject to asbestos rules and regulations. Asbestos Awareness Training is required annually for employees whose work activities may contact asbestos-containing materials (ACM) or presumed asbestos-containing materials (PACM), but do not disturb ACM or PACM during their work activities. Lead is found both in industry and in construction, and poses a threat to all who come into contact with it. This combined training consists of information regarding asbestos and lead and their various forms and uses. Training also includes information on the health effects associated with asbestos and/or lead exposure. Attendees will receive their two-hour, Class IV Asbestos Awareness certification card. (1 session)

(Please note: If you have been approved for a MTI scholarship, please fax or mail your CAMTEC registration form with your portion of the tuition payment so that your discount may be applied appropriately.)  

Instructor:  Kristin Osterkamp, CIH, CSP – MIOSHA

CLICK HERE FOR COURSE DATES AND TO REGISTER

Confined Spaces in Construction and Permit Required Confined Spaces in GI - MTI Elective

This course will provide and overview of both the construction and general industry rules related to confined spaces and permit-required confined spaces. Examples of actual spaces will be used to clarify the definition and facilitate proper identification of confined spaces versus permit-required confined spaces. (1 session)

(Please note: If you have been approved for a MTI scholarship, please fax or mail your CAMTEC registration form with your portion of the tuition payment so that your discount may be applied appropriately.)  

Instructor:  Kristin Osterkamp, CIH, CSP – MIOSHA

CLICK HERE FOR COURSE DATES AND TO REGISTER

Construction 10-Hour Course - MTI Required

Instructor: Bryan Renaud – MIOSHA CET Division

This 2-session, 10-hour program presents an overview of MIOSHA regulations for the construction industry.  Detailed information is presented to enable the participant to develop an accident prevention plan as required by Rule 114 of MIOSHA Construction Safety Standard Part 1, General Rules. An overview of MIOSHA inspection procedure is presented, as well as the most frequently cited MIOSHA violations in the construction industry. Participants gain detailed information regarding construction health and safety standards relative to the industry. Students will receive both MIOSHA and OSHA 10-hour cards upon successful completion of the class.

CLICK HERE FOR DATES AND TO REGISTER

Electricity: The Invisible Killer- MTI Elective

Instructor:

Bryan Renaud, Constrcution Safety Consultant-MIOSHA

Electrocutions continue to be one of the leading causes of fatalities in construction.  This program will explain and illustrate the primary electrical hazards in and around construction.  There will be special emphasis on the importance of recognizing and eliminating hazards in order to avoid shock and/or electrocution in the work place.  Also covered in the program will be MIOSHA standards that apply to electrical hazards; what constitutes a fatal amount of current and when overhead lines need to be de-energized.

CHECK BACK FOR THE NEXT AVAILABLE CLASS

Elements of a Safety & Health Management System - MTI Required

This program is a must for anyone concerned about health and safety on the job, including managers concerned about liability and workers’ compensation costs, employees who want to learn proper techniques for protecting their safety and health at work, and business owners who want to learn about compliance with MIOSHA. Attendees will learn that an effective Safety and Health Management System (SHMS) has proven to be a decisive factor in reducing the extent and severity of work-related injuries and illnesses. The result is lower accident-related costs, reduced absenteeism, lower turnover, higher productivity, and improved employee morale. (2 sessions)

(Please note: If you have been approved for a MTI scholarship, please fax or mail your CAMTEC registration form with your portion of the tuition payment so that your discount may be applied appropriately.)  

Instructor:
Brenda Cani, MIOSHA-CET Division

CLICK HERE FOR COURSE DATES AND TO REGISTER

Excavations: The Grave Danger - MTI Elective

This workshop will provide an overview of MIOSHA Part 9: Excavations, Trenching and Shoring. In addition, the electrical hazards and applicable regulations associates will be discussed, as well as identifying hazards at their workplace associated with mobile equipment. This will be followed by a question and answer session. (1 session)

Instructor:
Bryan Renaud – MIOSHA CET Division

CLICK HERE FOR COURSE DATES AND TO REGISTER

Fall Protection - Part 45 - MTI Required

Attendees will review the MIOSHA Part 45 Construction Safety Standard for Protection including the latest OSHA and MIOSHA interpretations. Examination of recent fatal falls in construction and discussion of the latest fall protection techniques for construction will be covered. This will be followed by a question and answer session. (1 session)

Instructor:
Bryan Renaud

CLICK HERE FOR COURSE DATES AND TO REGISTER

Health Hazards in Construction - MTI Required

This course will help educate and make the construction manager/worker aware of some typical occupational health hazards and potential health effects that are associated with the construction trade industry. This workshop is designed to give the student an overview of the basics of industrial hygiene, as well as health issues that may be encountered in the construction industry. Topics covered include lead, silica, cadmium, isocyanates, hexavalent chromium, and asbestos. Students will be able to recognize potential problems with exposures and how to protect themselves with the use of engineering controls and personal protective equipment.  (1 session)

(Please note: If you have been approved for a MTI scholarship, please fax or mail your CAMTEC registration form with your portion of the tuition payment so that your discount may be applied appropriately.)  

CLICK HERE FOR THE JANUARY CLASS IN BLOOMFIELD HILLS

MIOSHA Recordkeeping & Cost of Injuries - MTI Elective

This program is designed to help employers ensure that their organization complies with MIOSHA recordkeeping requirements as contained in MIOSHA Administrative Rules Part 11, Recording and Reporting of Occupational Injuries and Illnesses. In addition to learning and understanding the “recordability” of work related injuries and illnesses, attendees will actively participate in a group excercise to complete the MIOSHA 300 log. Using this data, participants calculate injury and illness rates and learn how to compare these rates to other companies with North American Industrial Classification System (NAICS). (1 session)
(Please note: If you have been approved for a MTI scholarship, please fax or mail your CAMTEC registration form with your portion of the tuition payment so that your discount may be applied appropriately.)  

Instructor:  Brenda Cani – MIOSHA

CLICK HERE FOR COURSE DATES AND TO REGISTER

Recommended Practices for Safety and Health Programs - MTI Elective

These recommended practices provide responsible employers, workers, and worker representatives with a sound, flexible framework for addressing safety and health issues in diverse workplaces. They may be used in any workplace, but will be particularly helpful in small and medium-sized workplaces. They can be applied equally well in traditional, fixed manufacturing workplaces and in the service sector, healthcare, retail, and even mobile or office-based work environments.

Instructor: Brandi Cani

CLICK HERE FOR COURSE DATES AND REGISTRATION

Respiratory Protection - Part 451 - MTI Elective

This full-day course was developed to teach participants: The requirements of Part 451, Respiratory Protection (1910.134), the necessary elements of a written respiratory protection program, MIOSHA interpretations of common questions about the Respiratory Protection Standard and the most common violations associated with the standard.

Instructor:

Kristin Osterkamp – MIOSHA

PLEASE CHECK BACK FOR THE NEXT AVAILABLE CLASS

Scaffolds & Scaffold Platforms - Part 12 - MTI Elective

Attendees will be indoctrinated on the contents of the MIOSHA Construction Safety Standard Part 12, Scaffolds and Scaffold Platforms. This information will be conveyed through the use of PowerPoint, videos, lecture, and the use of a scale model frame scaffold. The focus will be on the most commonly used scaffolds in the construction industry including ground supported, suspended, mobile, and rough terrain forklift scaffolds. Also included will be the common hazards as well as best practices associated with the use of scaffolds. At the conclusion of the course there will be a Q & A session followed by a quiz. Agenda: References the different parts of Part 12 Scaffolds and Scaffold Platforms; Apply the MIOSHA Requirements of Part 12 to the most commonly used scaffolds in construction. Discuss Best Practices from the industry. (1 session)

Instructor:
Bryan Renaud – MIOSHA CET Division

CLICK HERE FOR COURSE DATES AND TO REGISTER

Supervisor's Role in Safety & Health - MTI Elective

Instructor:

Jennifer Clark-Denson, MIOSHA-CET

This seminar is designed for both General Industry and Construction first-line supervision, safety and health committee members, and management personnel. Topics include employee safety and health training, accident investigation, hazard recognition, and self-inspection techniques. This program gives tips to supervision on methods to integrate health and safety into their daily duties and responsibilities. Using MIOSHA General Industry and Construction standards and required written programs as a baseline, supervisors are given suggestions to improve their safety and health hazard recognition skills. (1 session)

(Please note: If you have been approved for a MTI scholarship, please fax or mail your CAMTEC registration form with your portion of the tuition payment so that your discount may be applied appropriately.)  

CLICK HERE FOR COURSE DATES AND TO REGISTER

When MIOSHA Enforcement Visits - MTI Elective

Attendees from both the construction and general industry sector will gain an insight of the process and procedures a MIOSHA compliance officer follows while conducting a workplace inspection and how to respond to MIOSHA citations. Topics covered include inspection types, employer/ employee rights and responsibilities, and penalty reduction factors. This program will assist students in preparing for an inspection and students will work through a sample citation. Students will be provided with hands-on exercises to reinforce the principles that are discussed in the course. (1 session)

Instructor: 

Brenda Cani – MIOSHA

(Please note: If you have been approved for a MTI scholarship, please fax or mail your CAMTEC registration form with your portion of the tuition payment so that your discount may be applied appropriately.)  

CHECK BACK FOR THE NEXT AVAILABLE CLASS 

Mid-America OSHA
Training Center Classes

OSHA 500: Trainer Course in Occupational Safety and Health Standards for Construction

Brought to CAMTEC by the Mid-America OSHA Training Center

This course is designed for individuals interested in teaching the 10- and 30-hour construction safety and health Outreach Training Program to their employees and other interested groups. Using OSHA Construction Standards as a guide, special emphasis is placed on those topics required in the 10- and 30-hour programs as well as those which are most hazardous. Students are briefed on effective instructional approaches and use of visual aids and handouts. This course allows the student to become a trainer in the OSHA Outreach Training Program, to conduct both 10- and 30-hour Construction Outreach classes, and to issue cards to participants after verifying course completion. Students who wish to participate as authorized Outreach trainers in the OSHA Outreach Training Program must prepare a presentation on an assigned OSHA Construction Outreach Training Program topic individually or as part of a group and successfully pass a written exam at the end of the course.

Prerequisites: OSHA 510 and five years of construction safety experience.

PLEASE CHECK BACK FOR THE NEXT AVAILABLE CLASS

OSHA 510: Occupational Safety & Health Standards for Construction

Brought to CAMTEC by the Mid-America OSHA Training Center

This course covers OSHA Standards, policies, and procedures in the construction industry. Topics include scope and application of the OSHA Construction Standards, construction safety and health principles, and special emphasis on those areas in construction which are most hazardous. Upon course completion students will have the ability to define construction terms found in the OSHA Construction Standards, identify hazards which occur in the construction industry, locate and determine appropriate OSHA Construction Standards, policies, and procedures, and describe the use of the OSHA Construction Standards and regulations to supplement an ongoing safety and health program.

PLEASE CHECK BACK FOR THE NEXT AVAILABLE CLASS

OSHA 521: OSHA Guide to Industrial Hygiene

Brought to CAMTEC by the Mid-America OSHA Training Center

This course covers industrial hygiene practices and related OSHA regulations and procedures. Course topics include recognition, evaluation, and control of chemical, physical, biological and ergonomic hazards, Permissible Exposure Limits (PEL), OSHA health standards, respiratory protection, engineering controls, OSHA sampling protocols and strategies, and workplace health program elements. The course features workshops in health hazard recognition, OSHA health standards and use of sampling equipment. Upon course completion students will have the ability to recognize basic industrial hygiene principles and practices, identify characteristics of common air contaminants, locate PELs, perform basic industrial hygiene calculations, and determine methods for hazard control and abatement.

Click here for dates and to register

OSHA 2015: Hazardous Materials

Brought to CAMTEC by the Mid-America OSHA Training Center

This course covers OSHA General Industry Standards and other consensus and proprietary standards that relate to the use of hazardous materials. Course topics include flammable and combustible liquids, compressed gases, LP-gases, and cryogenic liquids. Related processes such as spraying and dipping, and use of electrical equipment in hazardous locations are also discussed. Upon course completion students will have the ability to assess compliance with OSHA hazardous materials standards, determine hazardous (classified) locations, and proper moving, storing, and handling of hazardous materials.

PLEASE CHECK BACK FOR THE NEXT AVAILABLE CLASS

OSHA 2225: Respiratory Protection

Brought to CAMTEC by the Mid-America OSHA Training Center

This course covers the requirements for the establishment, maintenance, and monitoring of a respiratory protection program. Course topics include terminology, OSHA Respiratory Protection Standards, NIOSH certification, respiratory protection programs, and medical evaluation requirements. Program highlights include workshops on respirator selection, qualitative and quantitative fit testing, and the use of respiratory protection and support equipment. Upon course completion students will have the ability to identify and describe the elements of a respiratory protection program, the proper selection, use, and inspection of respiratory protection, protection factors, and evaluate compliance with OSHA Standards.

CLICK HERE FOR COURSE DATES & TO REGISTER 

OSHA 2264: Permit-Required Confined Space Entry

Brought to CAMTEC by the Mid-America OSHA Training Center

This course covers the safety and health hazards associated with permit-required confined space entry. Course topics include recognition of confined space hazards, identification of permit and non-permit required confined spaces, use of instrumentation to evaluate atmospheric hazards, ventilation techniques, development and implementation of a confined space program, proper signage, and training requirements. This course features workshops on permit entry classification, instrumentation, and program development. Upon course completion students will have the ability to identify permit and non-permit required confined spaces, reference the OSHA Permit-Required Confined Spaces Standard, conduct atmospheric testing, and implement a permit-required confined space program.

CLICK HERE FOR COURSE DATES & TO REGISTER 

OSHA 3015: Excavation, Trenching & Soil Mechanics

Brought to CAMTEC by the Mid-America OSHA Training Center

This course covers the OSHA Excavation Standard and safety and health aspects of excavation and trenching. Course topics include practical soil mechanics and its relationship to the stability of shored and unshored slopes and walls of excavations, introduction of various types of shoring (wood timbers and hydraulic), soil classification, and use of protective systems. Testing methods are demonstrated and students participate in workshops in the use of instruments such as penetrometers, torvane shears, and engineering rods. Upon course completion students will have the ability to assess their employer’s compliance with the OSHA Excavation Standard, utilize soil testing methods to classify soil types, determine protective systems for excavation operations, and training requirements. (3 Days)

CLICK HERE FOR COURSE DATES & TO REGISTER

OSHA 3095: Electrical Standards

Brought to CAMTEC by the Mid-America OSHA Training Center

This course covers OSHA Electrical Standards and the hazards associated with electrical installations and equipment. Course topics include single- and three-phase systems, cord- and plug-connected and fixed equipment, grounding, ground fault circuit interrupters, and safety-related work practices. Emphasis is placed on electrical hazard recognition and OSHA Standards, policies, and procedures and applicable portions of the National Electrical Code (NEC). Students will participate in workshops on the safe and correct use of electrical testing equipment. Upon course completion students will have the ability to understand the severity of electrical current on the human body, recognize and evaluate actual and potential electrical hazards and reference the applicable OSHA Standard, determine hazard abatement measures, and understand the proper use of electrical testing equipment.

PLEASE CHECK BACK FOR THE NEXT CLASS DATES 

OSHA 3115: Fall Protection including EM-385

Brought to CAMTEC by the Mid-America OSHA Training Center

This course covers the OSHA Fall Protection Standard for construction and an overview of fall protection methods. Course topics include principles of fall protection, components and limitations of fall arrest systems, and OSHA Standards and policies regarding fall protection. This course meets the U.S. Army Corps of Engineers EM-385 fall protection requirements. Students will participate in workshops demonstrating the inspection and use of fall protection equipment, residential construction fall protection, training requirements, and developing a fall protection program. Upon course completion students will have the ability to assess compliance with the OSHA Fall Protection Standard, evaluate installed passive systems and fall arrest systems, and develop and implement fall protection plans.

CLICK HERE FOR COURSE DATES & TO REGISTER 

OSHA 7105: Evacuation & Emergency Planning

Brought to CAMTEC by the Mid-America OSHA Training Center

This course covers OSHA requirements for emergency action and fire protection plans. Course topics include purpose and requirements of emergency action and fire prevention plans, elements of emergency evacuation plans, and features of design and maintenance of emergency exit routes. Students will participate in workshops pertaining to the development of emergency action plans. Upon course completion students will have the ability to list the elements of an emergency action plan and emergency evacuation floor plans, recognize violations of OSHA exit route requirements, determine whether their organization requires an emergency action plan, and develop and implement workplace emergency action and fire protection plans.

PLEASE CHECK BACK FOR THE NEXT AVAILABLE CLASS

OSHA 7205: Health Hazard Awareness

Brought to CAMTEC by the Mid-America OSHA Training Center

This course covers common health hazards that are encountered in the workplace. These health hazards include exposure to chemicals, asbestos, silica and lead. Course topics include identification and evaluation of health hazards and their sources of exposure, health hazard information, and engineering and work practice controls. Students participate in workshops on evaluation and abatement of workplace health hazards. Upon course completion students will have the ability to understand common health hazards in the workplace and methods for controlling and abatement of these hazards.

CLICK HERE FOR COURSE DATES & TO REGISTER 

OSHA 7500: Intro to Safety and Health Management

Brought to CAMTEC by the Mid-America OSHA Training Center

This course covers the effective implementation of a company’s safety and health management system. The course addresses the four core elements of an effective safety and health management system and those central issues that are critical to each element’s proper management. This course is an interactive training session focusing on class discussion and workshops. Upon course completion students will have the ability to evaluate, develop, and implement an effective safety and health management system for their company.

PLEASE CHECK BACK FOR THE NEXT AVAILABLE CLASS

OSHA 7505: Introduction to Incident Investigation

Brought to CAMTEC by the Mid-America OSHA Training Center

This course covers an introduction to basic incident investigation procedures and describes analysis techniques. Course topics include reasons for conducting incident investigations, employer responsibilities related to workplace incident investigations, and a four step incident investigation procedure. The target audience is the employer, manager, employee or employee representative who is involved in conducting incident and/ or near-miss investigations. Upon course completion students will have the basic skills necessary to conduct an effective incident investigation at the workplace.

CLICK HERE FOR COURSE DATES & TO REGISTER 

OSHA 7845: Recordkeeping Rule Seminar

Brought to CAMTEC by the Mid-America OSHA Training Center

This course covers OSHA requirements for maintaining and posting records of occupational injuries and illnesses, and reporting specific cases to OSHA. Upon course completion students will have the ability to identify OSHA requirements for recordkeeping, posting and reporting and to complete OSHA Form 300 Log of Work-Related Injuries and Illnesses, OSHA Form 300A Summary of Work-Related Injuries and Illnesses, and OSHA Form 301 Injury and Illness Incident Report.

CLICK HERE FOR COURSE DATES & TO REGISTER 

MA3210: Scaffold Safety

Brought to CAMTEC by the Mid-America OSHA Training Center

Whenever a worker leaves the ground, the danger of an accident taking place drastically increases. With more than 10,000 scaffold related accidental injuries recorded each and every year, the Occupational Safety and Health Administration (OSHA) has required that every worker be trained concerning how to safely erect and employ scaffolding equipment. This course will help employers meet the safety training requirements of OSHA’s Scaffolding regulations. The safety training guides workers on how to be aware of the perils associated with working with scaffolds and in what way these potential risks can be lowered by learning how to assemble maintain and use scaffold platforms.

CLICK HERE FOR COURSE DATES & TO REGISTER 

Other Available Courses

CAMTEC's IT Lunch & Learn Series

Starting this winter! CAMTEC’s IT Lunch & Learn Series is designed for business owners and decision makers who would like a better understanding of their IT issues in order to make informed decisions in running their organizations.

NOVEMBER 9

Reducing Business Risk Through Strategic  IT Security

Learn more and register here

FEBRUARY 8

Data Loss Disasters and How to Avoid Them 

Learn more and register here

MAY 10

Strategic IT Management for Non-Technical Executives

Learn more and register here

The Nine Biggest Neglects at Trade Shows: Exhibitors Sales Training

Learn how to attract more prospects to your booth, receive tips on what to do BEFORE and AFTER the trade show and how to increase your sales closing percentage from trade show leads. Why you should attend? Ask yourself these questions…

  • Has your company ever invested marketing dollars for a booth at a trade show and felt you did not get your money’s worth?
  • Concerned when people enter your booth…only to leave uninterested?
  • Are you frustrated that the right people don’t show up at your booth?
  • Are you tired of 70% of your trade show leads go to waste?

If you are the President, Business Owner or Salesperson, then you should attend! Advanced registration is required – space is limited. Exhibitors may send up to two employees from the same company.

Instructor:

Matt Stephens
Gerry Weinberg & Associates / Sandler Training

CLICK HERE FOR COURSE DATE AND TO REGISTER

Residential Builders 60-Hour Pre-License Course

The two-week, 60-hour builders license course preps students to pass the Michigan Builders License Examination OR Maintenance and Alteration Exam. Approved by the State of Michigan and satisfies the 60-hour pre-license course requirement.

TWO UPCOMING SESSIONS- DAY AND EVENING CLASSES ARE AVAILABLE!

July 9 – July 21
Monday-Friday 5:00 p.m. – 10:00 p.m., Saturdays 8:00 a.m. – 1:00 p.m.
CLICK HERE FOR MORE INFORMATION AND TO REGISTER

August 20 – August 30
Monday-Friday 5:00 p.m. –  10:00 p.m., Saturdays 8:00 a.m. – 1:00 p.m.
CLICK HERE FOR MORE INFORMATION AND TO REGISTER

2018 Safety Leadership Conference

The Construction Association of Michigan has teamed up with the Greater Detroit Chapter of the American Society of Safety Engineers (ASSE) and Oakland Community College to provide a one-day conference specifically designed for leaders with a responsibility for employee safety.  Company owners, top executives, safety managers, and human resource personnel will all find value in the diverse range of topics available. This world-class collection of qualified presenters offers the best talent this area has ever seen.

FRIDAY, DECEMBER 7, 7:00 a.m.-7:00 p.m.

LEARN MORE HERE

+ Registration Form

/
Thank you for your registration! By submitting this registration form, you will also be opted-in to receive emails about upcoming education opportunities.